PLANET WGSD-10020HP - Manual (Page 309)

User’s Manual of WGSD-10020 Series
A PD will return to Class 0 to 4 in accordance with the maximum power draw as specified by Table 4-16-1.
Class Usage Range of maximum power used by the PD Class Description
0 Default
12.95 watts (or to 15.4 watts for AF mode)
25.5 watts (or to 30.8 watts for AT mode)
Mid power or High power
1 Optional 0.44 to 3.84 watts Very low power
2 Optional 3.84 to 6.49 watts Low power
3 Optional 6.49 to 12.95 watts (or to 15.4 watts) Mid power
4 Optional 12.95 to 25.50 watts (or to 30.8 watts) High power
Table 4-16-1 Device Class
4.16.4 Port Sequential
This page allows the user to configure the PoE Ports started up interval time. The PoE Port will start up one by one as Figure
4-16-3 shows.
Figure 4-16-3: PoE Port Sequential Power Up Interval Configuration Screenshot
The PoE port will start up after the whole system program has finished running.
The page includes the following fields:
Object Description
 Sequential Power up
Option
Allows user to enable or disable Sequential Power up function.
 Sequential Power up
Interval
Allows user to configure the PoE Port Start Up interval time.
 Sequential Power up
Port Option
There are two modes for Starting Up the PoE Port
By Port: The PoE Port will start up by following Port number.
By Priority: The PoE Port will start up by following the PoE Priority.
Buttons
309