PLANET WGSD-10020HP - Manual (Page 208)

User’s Manual of WGSD-10020 Series
Specify the hop limit settings for this ACE.
■ zero : IPv6 frames with a hop limit field greater than zero must not be able
to match this entry.
■ non-zero : IPv6 frames with a hop limit field greater than zero must be able
to match this entry.
■ Any : Any value is allowed ("don't-care”).
 Hop Limit
 ICMP Parameters
Object Description
Specify the ICMP filter for this ACE.
■ Any : No ICMP filter is specified (ICMP filter status is "don't-care").
■ Specific : If you want to filter a specific ICMP filter with this ACE, you can
enter a specific ICMP value. A field for entering an ICMP value appears.

ICMP Type Filter
When "Specific" is selected for the ICMP filter, you can enter a specific ICMP
value.
The allowed range is 0 to 255. A frame that hits this ACE matches this ICMP
value.

ICMP Type Value
Specify the ICMP code filter for this ACE.
■ Any : No ICMP code filter is specified (ICMP code filter status is
"don't-care").
■ Specific : If you want to filter a specific ICMP code filter with this ACE, you
can enter a specific ICMP code value. A field for entering an ICMP code
value appears.

ICMP Code Filter
When "Specific" is selected for the ICMP code filter, you can enter a specific
ICMP code value.
The allowed range is 0 to 255. A frame that hits this ACE matches this ICMP
code value.

ICMP Code Value
 TCP/UDP Parameters
Object Description

TCP/UDP Source Filter
Specify the TCP/UDP source filter for this ACE.
■ Any : No TCP/UDP source filter is specified (TCP/UDP source filter status
is "don't-care").
■ Specific : If you want to filter a specific TCP/UDP source filter with this
ACE, you can enter a specific TCP/UDP source value. A field for entering a
TCP/UDP source value appears.
208