PLANET WGSD-10020HP - Manual (Page 14)

User’s Manual of WGSD-10020 Series
1.4 Product Features
 Physical Port
WGSD-10020

8-Port 10/100/1000Base-T Gigabit Ethernet RJ45

2 100/1000Base-X SFP slots

RS-232 DB9 console interface for switch basic management and setup
WGSD-10020HP

8-Port 10/100/1000Base-T Gigabit Ethernet RJ45 with IEEE 802.3af / 802.3at PoE Injector

2 100/1000Base-X SFP slots

RS-232 DB9 console interface for switch basic management and setup
 Layer 2 Features
■ Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x PAUSE frame flow control (full-duplex)
■ High performance of Store-and-Forward architecture and runt/CRC filtering eliminates erroneous packets to optimize
the network bandwidth
■ Storm Control support:
 Broadcast / Multicast / Unknown-Unicast
■ Supports VLAN
 IEEE 802.1Q Tagged VLAN
 Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
 Private VLAN Edge (PVE)
 Protocol-based VLAN
 MAC-based VLAN
 Voice VLAN
 Management VLAN
■ Supports Spanning Tree Protocol
 STP, IEEE 802.1D Spanning Tree Protocol
 RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
 MSTP, IEEE 802.1s Multiple Spanning Tree Protocol, spanning tree by VLAN
 STP BPDU Guard and BPDU Filtering
■ Supports Link Aggregation
 IEEE 802.3ad Link Aggregation Control Protocol (LACP)
 Cisco ether-channel (Static Trunk)
 Maximum 5 trunk groups, up to 10 ports per trunk group
 Up to 20Gbps bandwidth(duplex mode)
■ Provides port mirror (many-to-1)
■ Port Mirroring to monitor the incoming or outgoing traffic on a particular port
■ Loop protection to avoid broadcast loops
14