PLANET WGSD-10020HP - Manual (Page 21)

User’s Manual of WGSD-10020 Series
Reset Button Pressed and Released Function
< 5 sec : System reboot Reboot the Managed Switch
> 5 sec : Factory Default
Reset the Managed Switch to Factory Default configuration.
The Managed Switch will then reboot and load the default
settings as shown below:
。 Default Username: admin
。 Default Password: admin
。 Default IP address: 192.168.0.100
。 Subnet mask: 255.255.255.0
。 Default Gateway: 192.168.0.254
2.1.2 LED Indications
The front panel LEDs indicates instant status of port links, data activity and system power; helps to monitor and troubleshoot
when needed. Figure 2-3 and Figure 2-4 show the LED indications of these Managed Switches.
WGSD-10020 LED indication
Figure 2-3 WGSD-10020 LED panel
System
LED Color Function
PWR Green Lights to indicate that the Switch has power.
Per 10/100/1000Mbps port
LED Color Function
1000
L
Green
d.
NK/ACT
Lights to indicate the port is running at 1000Mbps speed and successfully establishe
Blink s to indicate that the switch is actively sending or receiving data over that port.
10/100
LNK/ACT
Green
hed.
Blink s to indicate that the switch is actively sending or receiving data over that port.
Lights to indicate the port is running at 10/100Mbps speed and successfully establis
21