PLANET WGSD-10020HP - Manual (Page 26)

User’s Manual of WGSD-10020 Series
2.2.3 Installing the SFP Transceiver
The sections describe how to insert an SFP transceiver into an SFP slot.
The SFP transceivers are hot-pluggable and hot-swappable. You can plug in and out the transceiver to/from any SFP port
without having to power down the Managed Switch as the Figure 2-10 appears.
Figure 2-10 Plug-in the SFP transceiver
 Approved PLANET SFP Transceivers
PLANET Managed Switch supports both single mode and multi-mode SFP transceiver. The following list of approved PLANET
SFP transceivers is correct at the time of publication:
Fast Ethernet Transceiver (100Base-X SFP)
Model Speed (Mbps)
Connector
Interface
Fiber Mode Distance Wavelength (nm) Operating Temp.
MFB-FX 100 LC Multi Mode 2km 1310nm 0 ~ 60 ℃
MFB-F20 100 LC Single Mode 20km 1310nm 0 ~ 60 ℃
MFB-F40 100 LC Single Mode 40km 1310nm 0 ~ 60 ℃
MFB-F60 100 LC Single Mode 60km 1310nm 0 ~ 60 ℃
MFB-F120 100 LC Single Mode 120km 1550nm 0 ~ 60 ℃
MFB-TFX 100 LC Multi Mode 2km 1310nm -40 ~ 75 ℃
MFB-TF20 100 LC Single Mode 20km 1550nm -40 ~ 75 ℃
Fast Ethernet Transceiver (100Base-BX, Single Fiber Bi-Directional SFP)
Model Speed (Mbps)
Connector
Interface
Fiber Mode Distance Wavelength (TX) Wavelength (RX) Operating Temp.
MFB-FA20 100 WDM(LC) Single Mode 20km 1310nm 1550nm 0 ~ 60 ℃
MFB-FB20 100 WDM(LC) Single Mode 20km 1550nm 1310nm 0 ~ 60 ℃
26