PLANET WGSD-10020HP User Manual
Page 118
User’s Manual of WGSD-10020 Series
Figure 4-6-13:
Change Port VLAN of Port 1~3 as VLAN2 and Port VLAN of Port 4~6 as VLAN3
For the VLAN ports connecting to the hosts, please refer to 4.6.10.1 examples. The following steps will focus on the VLAN
Trunk port
configuration.
1. Specify
Port-7
to be the 802.1Q VLAN Trunk port.
2. Assign
Port-7
to both VLAN 2 and VLAN 3 on the VLAN Member configuration Page.
3. Define
a
VLAN 1
as a “Public Area” that overlaps with both VLAN 2 members and VLAN 3 members.
4. Assign the VLAN Trunk Port to being the member of each VLAN – which wants to be aggregated. For example, include
Port-7
to be VLAN 2 and VLAN 3 member ports.
5. Specify
Port-7
to be the 802.1Q VLAN Trunk port, and the Trunking port must be a Tagged port while egress. The Port-7
configuration is shown in
Figure 4-6-1
4
.
Figure 4-6-14:
VLAN Overlapping Port Setting & VLAN 1 – The Public Area Member
Both the VLAN 2 members of Port-1 to Port-3 and VLAN 3 members of Port-4 to Port-6 belong to VLAN 1. But with different
PVID settings, packets from VLAN 2 or VLAN 3 are not able to access to the other VLAN.
118