PLANET WGSD-10020HP User Manual
Page 167
User’s Manual of WGSD-10020 Series
Figure 4-8-19:
MVR Configuration Page Screenshot
The Page includes the following fields:
Object
Description
MVR Mode
Enable/Disable the Global MVR.
The Unregistered Flooding control depends on the current configuration in
IGMP/MLD Snooping. It is suggested to enable Unregistered Flooding control
when the MVR group table is full.
Delete
Check to delete the entry. The designated entry will be deleted during the next
save.
MVR VID
Specify the Multicast VLAN ID.
Be Caution
: MVR source ports are not recommended to be overlapped with
management VLAN ports.
MVR Name
MVR Name is an optional attribute to indicate the name of the specific MVR
VLAN. Maximum length of the MVR VLAN Name string is 16. MVR VLAN Name
can only contain alphabets or numbers. When the optional MVR VLAN name is
given, it should contain at least one alphabet. MVR VLAN name can be edited for
the existing MVR VLAN entries or it can be added to the new entries.
IGMP Address
Define the IPv4 address as source address used in IP hea
167