PLANET WGSD-10020HP - Manual (Page 310)

User’s Manual of WGSD-10020 Series
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
4.16.5 Port Configuration
This section allows the user to inspect and configure the current PoE port settings as Figure 4-16-4 shows.
Figure 4-16-4: Power over Ethernet Configuration Screenshot
The page includes the following fields:
Object Description
 PoE Mode There are three modes for PoE mode.

Enable : enable PoE function..

Disable : disable PoE function.

Schedule : enable PoE function in schedule mode.
 Schedule Indicates the scheduled profile mode. Possible profiles are:

Profile1

Profile2

Profile3

Profile4
 AF/AT Mode Allows user to select 802.3at or 802.3af compatibility mode. The default vaule is
802.3at mode.
This function will affect PoE power reservation on Classification power limit mode
only. In the 802.3af mode, system is going to reserve 15.4W maximum for PD
that supports Class3 level. In the IEEE 802.3at mode, system is going to reserve
30.8W for PD that supports Class4 level.
310