PLANET MGSW-24160F - Manual (Page 82)

User’s Manual of MGSW-24160F
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
4.3.4 SNMP Trap Configuration
Configure SNMP trap on this page. The SNMP Trap Configuration screen in Figure 4-3-3 appears.
Figure 4-3-3 SNMP Trap Configuration Page Screenshot
The page includes the following fields:
Object Description

Trap Mode Indicates the SNMP trap mode operation. Possible modes are:
Enabled : Enable SNMP trap mode operation.
Disabled : Disable SNMP trap mode operation.

Trap Version Indicates the SNMP trap supported version. Possible versions are:
SNMP v1 : Set SNMP trap supported version 1.
SNMP v2c : Set SNMP trap supported version 2c.
SNMP v3 : Set SNMP trap supported version 3.

Trap Community Indicates the community access string when send SNMP trap packet. The
allowed string length is 0 to 255, and the allowed content is the ASCII characters
from 33 to 126.

Trap Destination Indicates the SNMP trap destination address.
82