PLANET MGSW-24160F - Manual (Page 29)

User’s Manual of MGSW-24160F
■ 10/100/1000Base-T interfaces
LED Color Function
Lights: To indicate the link through that port is successfully established with speed
1000Mbps .
Blink : To indicate that the switch is actively sending or receiving data over that port.
1000
LNK/ACT
Green
Off: If L10/100 NK/ACT LED light-> indicate that the port is operating at 10Mbps or
100Mbps.
If LNK/ACT LED Off -> indicate that the port is link down.
Lights: To indicate the link through that port is successfully established with speed
10Mbps or 100Mbps.
Blink : To indicate that the switch is actively sending or receiving data over that port.
10/100
LNK/ACT
Orange
Off: If 1000 LNK/ACT LED light-> indicate that the port is operating at 1000Mbps
If 1000 LNK/ACT LED Off -> indicate that the port is link down.
■ 1000Base-SX/LX SFP interfaces (Shared Port-21~Port-24)
LED Color Function
Lights: To indicate the link through that SFP port is successfully established.
LNK/ACT Green
Off: To indicate that the SFP port is link down
2.1.3 Switch Rear Panel
The rear panel of the Managed Switch indicates an AC inlet power socket, which accepts input power from 100 to 240V AC,
50-60Hz. Figure 2-3 shows the rear panel of this Managed Switch.
MGSW-24160F Rear Panel
Figure 2-3 Rear Panel of MGSW-24160F
■ AC Power Receptacle
For compatibility with electric service in most areas of the world, the Managed Switch’s power supply automatically adjusts
to line power in the range 100-240VAC and 50/60 Hz.
Plug the female end of the power cord firmly into the receptalbe on the rear panel of the Managed Switch. Plug the other
end of the power cord into an electric service outlet then the power will be ready.
29