PLANET MGSW-24160F - Manual (Page 201)

User’s Manual of MGSW-24160F
UDP : Select UDP to filter IPv4 UDP protocol frames. Extra fields for defining
UDP parameters will appear. These fields are explained later in this help file.
TCP : Select TCP to filter IPv4 TCP protocol frames. Extra fields for defining TCP
parameters will appear. These fields are explained later in this help file.
 IP Protocol Value When "Specific" is selected for the IP protocol value, you can enter a specific
value. The allowed range is 0 to 255. A frame that hits this ACE matches this IP
protocol value.
 IP TTL Specify the Time-to-Live settings for this ACE.
zero : IPv4 frames with a Time-to-Live field greater than zero must not be able to
match this entry.
non-zero : IPv4 frames with a Time-to-Live field greater than zero must be able to
match this entry.
Any : Any value is allowed ("don't-care").
 IP Fragment Specify the fragment offset settings for this ACE. This involves the settings for the
More Fragments (MF) bit and the Fragment Offset (FRAG OFFSET) field for an
IPv4 frame.
No : IPv4 frames where the MF bit is set or the FRAG OFFSET field is greater
than zero must not be able to match this entry.
Yes : IPv4 frames where the MF bit is set or the FRAG OFFSET field is greater
than zero must be able to match this entry.
Any : Any value is allowed ("don't-care").
 IP Option Specify the options flag setting for this ACE.
No : IPv4 frames where the options flag is set must not be able to match this
entry.
Yes : IPv4 frames where the options flag is set must be able to match this entry.
Any : Any value is allowed ("don't-care").
 SIP Filter Specify the source IP filter for this ACE.
Any : No source IP filter is specified. (Source IP filter is "don't-care".)
Host : Source IP filter is set to Host. Specify the source IP address in the SIP
Address field that appears.
Network : Source IP filter is set to Network. Specify the source IP address and
source IP mask in the SIP Address and SIP Mask fields that appear.
 SIP Address When "Host" or "Network" is selected for the source IP filter, you can enter a
specific SIP address in dotted decimal notation.
 SIP Mask When "Network" is selected for the source IP filter, you can enter a specific SIP
mask in dotted decimal notation.
 DIP Filter Specify the destination IP filter for this ACE.
Any : No destination IP filter is specified. (Destination IP filter is "don't-care".)
Host : Destination IP filter is set to Host. Specify the destination IP address in the
201