5 bandwidth control – PLANET MGSW-24160F User Manual

Page 183

User’s Manual of MGSW-24160F



Default Class

Configure the default QoS class for the port, that is, the QoS class for frames not

matching any of the QCEs in the QCL.



QCL #

Select which QCL to use for the port.



Tag Priority

Select the default tag priority for this port when adding a Tag to the untagged

frames.



Queuing Mode

Select which Queuing mode for this port.

 Queue Weighted

Setting Queue weighted (Low: Normal: Medium: High) if the "Queuing Mode" is

"Weighted".

Buttons

: Click to save changes.

: Click to undo any changes made locally and revert to previously saved values.

4.9.5 Bandwidth Control

Configure the switch port rate limit for Polices and Shapers on this page. The settings relate to the currently selected unit, as

reflected by the page header. The screen Bandwidth Control in

Figure 4-9-10

appears.

183