PLANET MGSW-24160F - Manual (Page 315)

User’s Manual of MGSW-24160F
Enable IPv6 autoconfig function:
SWITCH/>ip ipv6 autoconfig enable
IPv6 Setup
Description:
Set or show the IPv6 setup.
Syntax:
IP IPv6 Setup [] [] [] []
Parameters:
: IPv6 address is in 128-bit records represented as eight fields of up to four hexadecimal digits with a colon
separates each field (:). For example, four hexadecimal digits with a colon separates each field (:). For
example, 'fe80::215:c5ff:fe03:4dc7'. The symbol '::' is a special syntax that can be used as a shorthand
way of representing multiple 16-bit groups of contiguous zeros; but it can only appear once. It also used
a following legally IPv4 address.
For example,'::192.1.2.34'.
: IPv6 subnet mask , default: Show IPv6 prefix
: IPv6 router , default: Show IPv6 router.
IPv6 address is in 128-bit records represented as eight fields of up to four hexadecimal digits with a
colon separates each field (:). For example, 'fe80::215:c5ff:fe03:4dc7'. The symbol '::' is a special syntax
that can be used as a shorthand way of representing multiple 16-bit groups of contiguous zeros; but it
can only appear once. It also used a following legally IPv4 address. For example,'::192.1.2.34'.
: VLAN ID (1-4095), default: Show VLAN ID
Default Setting:
IPv6 AUTOCONFIG mode : Disabled
IPv6 Link-Local Address: fe80::230:4fff:fe24:4d1
IPv6 Address : ::192.168.0.100
IPv6 Prefix : 96
IPv6 Router : ::
IPv6 VLAN ID : 1
Example:
Set IPv6 address:
SWITCH/>ip ipv6 setup 2001::0002 64 2100::0001 1
315