PLANET GSW-1602SF - Manual (Page 67)

User’s Manual of GSW-1602SF / GSW-2404SF
4.6.2 VLAN Port Configuration
The VLAN Port Configuration page contains fields for managing ports that are part of a VLAN. The Port Default VLAN ID
(PVID) is configured on the VLAN Port Configuration page. All untagged packets arriving to the device are tagged by the
ports PVID. The screen in
Figure 4-39 appears.
Figure 4-39 VLAN Port Configuration
The page includes the following fields: table 4-15 description of the VLAN Port Configuration.
Item
Description
VLAN Type
There’re two VLAN mode support – 802.1Q VLAN and Port-Based VLAN
• IEEE 802.1Q – Packets income will be tagged with VID as the PVID setting. All
ports on the Web Smart Gigabit Switch belong to default VLAN (VID 1).
• Port-Base - Packets can only be broadcast among other members of the same
VLAN group. Note all unselected ports are treated as belonging to the default
system VLAN.
If port-based VLAN are enabled, then VLAN-tagging feature is ignored. Default
mode is IEEE 802.1Q.
Port
Indicate port 1 to port 24 (GSW-24024SF), port 1 to port 16 (GSW-1602SF).
PVID
Allow assign PVID for selected port. The range for the PVID is 1-4094.
The PVID will be inserted into all untagged frames entering the ingress port. The
PVID must as same as the VLAN ID that the port belong to VLAN group, or the
untagged traffic will be dropped.
Link Type
Allow 802.1Q Untagged or Tagged VLAN for selected port.
When adding a VLAN to selected port, it tells the switch whether to keep or remove
the tag from a frame on egress.
-61-