PLANET GSW-1602SF - Manual (Page 120)

User’s Manual of GSW-1602SF / GSW-2404SF
Type
The MAC Address type for which the table is queried. There’re two possible type-
•
Dynamic - Addresses are associated with ports by learning the ports from the
frame source address
•
Static - Static addresses are manually configured. Packets received with the
destinated MAC address mathch the port static MAC setting will be
forward to the specify port.
MAC-Address
Specifies the MAC address for which the table is queried.
Table 4-35 Description of the Dynamic MAC Address Table
Although the MAC Address Table of GSW-Series Web-Smart switches are up to 8K .entries. To reduce the
Web-Page memory loading, the maximum MAC lists are limited to 256 entries.
4.13 Diagnostics
4.13.1 Ping Parameters
Use this screen to tell the Web Smart Gigabit Switch to send a Ping request to a specified IP address. You can use this
function to check whether the Web Smart Gigabit Switch can communicate with a particular IP station. Once you click the
Apply button, the switch will send n pings and the results will be displayed below the configurable data. The screen in
Figure 4-83 appears.
Figure 4-83 Ping Parameters screen
-114-