Avago Technologies LSI20320 - Manual (Page 32)

26 Fusion-MPT FCode User’s Guide
Copyright © 2000-2004 by LSI Logic Corporation. All rights reserved.
5.1.2 show-disks
Use the show-disks OpenBoot command to determine the name of the
adapter with the disks you intend to include in a mirrored volume:
ok show-disks
a) /pci@1f,0/pci@1/pci@1/IntraServer,fc@f,1/disk
b) /pci@1f,0/pci@1/pci@1/IntraServer,fc@f/disk
c) /pci@1f,0/pci@1/pci@1/LSILogic,scsi@b/disk
d) /pci@1f,0/pci@1,1/scsi@2/disk
e) /pci@1f,0/pci@1,1/ebus@1/fdthree@14,3203f0
q) NO SELECTION
Enter Selection, q to quit: c
/pci@1f,0/pci@1/pci@1/LSILogic,scsi@b/disk has been selected.
Type ^Y ( Control-Y ) to insert it in the command line.
e.g. ok nvalias mydev ^Y
for creating devalias mydev for
/pci@1f,0/pci@1/pci@1/LSILogic,scsi@b/disk
5.1.3 select
Use the select OpenBoot command to select the adapter entry; this
opens the adapter and bring the port online:
ok select /pci@1f,0/pci@1/pci@1/LSILogic,scsi@b