Epson 715c - Manual (Page 91)

82 Fine-tuning the Projector
You see the lamp usage hours and computer display settings on
the right:
The life span of the lamp is about 1000 hours. If the number
shown is close to 1000, make sure you have a spare lamp handy.
3. When you’re finished, press Esc or Menu .
Restoring the Default Settings
The Reset All option lets you return all the projector settings to their
default values.
Select Reset All and press the Enter button on the remote control to
display the confirmation screen. Select Yes to reset all the default
settings or No to cancel.
note
If you access the About
menu when the projector
display is set to video, you
only see the lamp life and
the video signal setting.
Lamp ON Time
Video Source
Input Signal
Frequency
SYNC Polarity
SYNC Mode
Resolution
Refresh Rate
9999 H
Computer
RGB
H 999. 99 KHz
V 999. 99 Hz
H Positive
V Negative
Sync On Green
9999x9999
999. 9 Hz :
:
:
:
:
:
:
:
:
: Video
Audio
Effect
Setting
Capture
Advanced
About
Reset All
:Select
Execute
Video
Audio
Effect
Setting
Capture
Advanced
About
Reset All
:Select :Execute