Epson 715c - Manual (Page 86)

Fine-tuning the Projector 77
Creating Your Own Startup Screen
You can transfer any image on your computer to the projector, and
then use it as the screen displayed when the projector is not receiving a
signal. You can also set it to be displayed when you press the
A/V Mute button, or as a startup screen. The image can be a company
logo, slogan, photograph, or any other image you want to use.
You can also use the Capture menu to capture and save images on the
memory card. See page 65 for instructions.
Capturing the Image
Start by displaying the image you want to use on the projector. You
can use an image from either a computer or video source such as a
VCR or digital camera. Then follow these steps to capture the image
and transfer it to the projector:
1. Press the Menu button on the remote control. You see the main
menu.
2. Use the Enter button to highlight the Capture menu.
3. Use the Enter button to highlight User’s Logo Capture and
press Enter again to select it. You see the message shown at the
right.
4. Select Yes and press Enter . A selection box displays over the
image.
Video
Audio
Effect
Setting
Capture
Advanced
About
Reset All
Image Capture
User's Logo Capture Execute
Execute
:Select :Enter