Epson 715c - Manual (Page 66)

Presenting Without a Computer 57
Two types of icons appear on the screen:
■ EasyMP creates a folder for each scenario on the card.
■ Scenarios always have the .SIT file name extension.
3. Use the Enter button on the remote control to highlight your
scenario file (SCN002.SIT, for example).
4. Press Enter. In a moment, your scenario begins. Each slide will
display for 30 seconds (unless you have set slides to advance on
mouse click).
You can press Enter to display the next slide immediately, or press
Esc to display the previous slide.
5. To exit the scenario at any point, press the EasyMP button on the
remote control. You see a confirmation message.
6. Press Enter to exit. In a moment, you return to the EasyMP main
screen.
Displaying Each Slide Manually
Even if your scenario is set to change slides automatically, you can still
change slides manually.
1. Press the EasyMP button on the remote control to display the
EasyMP main screen.
2. Use the Enter button on the remote control to highlight the
folder icon for your scenario.
3. Press the Esc button on the remote control to highlight the
Execute icon.
4. Press Enter to display the first slide in your scenario.
5. Continue pressing Enter to display each slide in sequence.
Press Esc to display the previous slide.
6. To exit the scenario at any point, press the EasyMP button on the
remote control. You see a confirmation message.
7. Press Enter to exit. In a moment, you return to the EasyMP main
screen.
note
You can modify your scenario
using EMP SlideMaker on
your computer. However, you
can also make certain types of
changes using EasyMP
without a computer.