Epson 715c - Manual (Page 83)

74 Fine-tuning the Projector
■ Color (composite video or S-Video only)
Adjusts the depth or intensity of the image.
■ Tint (video only)
Adjusts the balance of green to magenta in the image.
■ Sharpness
Sharpens or softens the image.
■ Gamma
Choose Dynamic for computer images with bright colors
(such as charts or graphs), Normal for the default, or Natural
to enhance video images.
■ Input Signal
Leave this setting on RGB when a computer is connected to
the Computer/Component Video port. When a component
video source is connected, choose YCbCr or YPbPr ,
depending on the type of signals produced by your source.
(You can tell which setting is correct by the quality of the
projected image.)
■ Auto Setup
Leave this setting ON to automatically optimize the computer
image. Turn it off if you want to save adjustments you have
made to the video settings.
4. When the image is set correctly, press Esc or Menu . Your settings
are automatically saved.
Adjusting the Sound
You can use the Audio menu to adjust the sound volume or
treble/bass balance.
1. Press the Menu button. You see the main menu.
2. Use the Enter button to highlight Audio .