Epson 715c - Manual (Page 80)

Fine-tuning the Projector 71
Changing Menu Settings
You can use the buttons on the remote control to access the menus
and change settings. Follow these steps:
1. To display the menu screen, press the Menu button on the
remote control. You see the menu screen:
The eight menus are listed on the left, and the options available
for the highlighted menu are shown on the right.
2. Press up or down on the Enter button to scroll through the menu
list.
3. When the menu you want is highlighted, press the Enter button
to select it. The highlight moves to the first option for that menu.
4. Use the Enter button to scroll through the list of options. (If a
computer or video source isn’t connected, certain options may be
unavailable.)
5. Use the Enter button to change the setting for the selected
option. Enabled settings have a green highlight.
6. Press the Esc button to return to the main menu. Your changes
are saved automatically.
7. Press Esc again (or the Menu button) to exit the menu system.
Power
Freeze
A/V Mute
E-Zoom
R/C ON
OFF
3
1
5
2 4
Enter
Esc
Menu
Comp
S-Video
Auto
P in P
Resize
Video
EasyMP
Help
- Volume +
Menu
button Position
Tracking
Sync.
Brightness
Contrast
Sharpness
Gamma
Input Signal
Auto Setup
Reset Adjustment
Execute
:
:
:
:
:
:
:
: 9999
99
0
0
0
Video
Audio
Effect
Setting
Capture
Advanced
About
Reset All
ON
RGB YUV(
Normal Dynamic Natural
OFF
YCbCr YPbPr )
:Select :Enter
menus
menu options
note
If you want to go back to the
default settings on any menu,
select
Reset , press Enter ,
select Yes , and then press
Enter .