Epson 715c - Manual (Page 50)

Creating Presentations for Your Projector 41
2. Press the button again. The memory card is released, and you can
remove it from the slot in the projector.
3. Press the button to insert it in the slot.
4. Insert the card in your computer’s PCMCIA slot or card reader.
See your computer documentation if you need instructions.
Continue with the steps on page 43 to install EasyMP so you can
create a scenario and transfer it to the card.
If you need additional memory cards, you can use any of the following
standard type II memory cards. Most require a PC card adapter:
If you need to remove the memory card from the adapter, simply pull
it out as shown:
■ CompactFlash ™ ■ Memory Stick ™
■ SmartMedia ™ ■ Microdrive ™
■ ATA flash (does not require a PC card adapter)
caution
Press the button carefully to
avoid breaking it. Make sure
the button is pressed in before
you store the projector in a
carrying case or box.
This side faces the
back of the projector