Accessing the memory card, Moving the memory card from the projector, To your computer – Epson 715c User Manual
Page 49
40
Creating Presentations for Your Projector
Accessing the Memory Card
To access the memory card, you can either transfer it to your
computer or use a USB cable to access the card in the projector. Use
the instructions to do one of the following:
■
Remove the memory card from the projector and insert it in your
computer’s PCMCIA slot or PC card reader.
■
Use a USB cable to connect your computer to the projector and
install the driver. This lets you transfer your presentation directly
to the memory card in the projector. (Available with Windows
98/Me/2000 only.)
Moving the Memory Card from the Projector to
Your Computer
If your laptop or desktop computer has a PCMCIA slot or PC card
reader, you can insert the projector’s memory card in your computer
to transfer your scenario. First you need to remove it from the
projector. Make sure a scenario is not playing and the card is not in
use (the access light is off) before you remove it.
1. Press the button below the card slot.
The button pops out.