Epson 715c - Manual (Page 59)

50 Creating Presentations for Your Projector
4. Choose how you want to advance to the next cell.
■ If you want to advance manually, click On mouse click.
■ If you want to advance automatically, set the timing in the
Automatically after box. You can set any length of time
between 1 and 1800 seconds (30 minutes).
5. To add a transition “special effect,” click the Effect box and
choose from the list.
6. When you’re finished setting up the transition for the selected cell
or cells, click OK .
7. Repeat steps 1 through 6 as necessary.
8. Click the Save button or choose Save from the File menu.
If you want to include computer access or video in your scenario,
continue with the steps in the next section. If you’re ready to transfer
your scenario to the projector, see page 52.
Adding Computer Access or Video
Adding computer access or video to your scenario lets you easily
switch sources in the middle of your presentation. You can set up your
scenario to switch manually or automatically and specify the length of
time before switching back to your presentation. For example, you can
have a video play for up to 30 minutes within your scenario.
1. Right-click in the Scenario window where you want to switch
sources (on the cell you want to follow the source switch). You see
the Cell menu, as shown at the left.
2. Choose Insert Source Control . A Control cell appears in your
scenario:
The cell is initially set to PC (computer access). This means that
your scenario will access a computer connected to the projector at
the point where the cell occurs. However, you can change the
source to video, as described in the following step.