Epson 715c - Manual (Page 82)

Fine-tuning the Projector 73
Repositioning the Image
Follow these steps to fine-tune the image position:
1. Press the Menu button. You see the main menu.
2. Press Enter to select the Video menu.
3. Press Enter to select the Position option. You see the following
on the right side of the screen:
4. Use the Enter button to move the image left, right, up, or down.
5. When the image is positioned the way you want, press Esc .
Adjusting Image Appearance
Follow these steps to adjust the appearance of your image:
1. Press the Menu button. You see the main menu.
2. Press Enter to select the Video menu.
3. Use the Enter button to set one of the following options:
■ Tracking (computer images only)
Removes unwanted vertical lines from a computer image by
matching the projector’s internal clock to various computer
signals.
■ Sync (computer images only)
Corrects fuzziness or screen flicker by synchronizing the
projector with the tracking signal sent from the computer.
■ Brightness
Lightens or darkens the overall image.
■ Contrast
Adjusts the difference between light and dark areas.
note
If you have repositioned the
image, you can use the
Auto button on the remote
control to restore the default
settings.