Epson 715c - Manual (Page 60)

Creating Presentations for Your Projector 51
3. Right-click the control cell and choose Cell Properties from the
menu. The Source Control box appears:
4. Select your source:
■ If you want to switch to video rather than a computer source,
click
Video.
■ If you plan to use the S-video connection for the DVD or
other source, click
S-Video.
5. Choose how you want to advance to the next cell.
■ If you want to advance manually, click On mouse click.
■ If you want to advance automatically, set the timing in the
Automatically after box. You can set any length of time
between 1 and 1800 seconds (30 minutes).
6. When you’re finished setting up the source control cell, click OK .
7. To choose how you want to advance to the source control cell,
right-click the previous cell, and choose Cell Properties from the
menu. Set up the Advance properties as described on page 50.
8. When you’re finished creating your scenario, click the Save
button or choose Save from the File menu.
Once your scenario is saved, follow the instructions in the next section
to transfer it to the memory card.