Extron electronic Twisted Pair Receiver VTR001 User Manual

Page 5

VTT001 and VTR001 • Quick Start Guide

CAUTION

Installation and service must be performed by authorized
personnel only. These units must be installed in
accordance with national and local electrical codes.

Step 1

Power off all devices and disconnect them from the power source.

Step 2

Connect the RJ-45 connectors of the transmitter and receiver to
either end of the UTP cable.

If making your own cable between the

transmitter and receiver, see “Installation” in chapter 2 for the RJ-45
wiring termination diagram.

RJ-45 termination must comply with the TIA/EIA T-568-A or
TIA/EIA T-568-B wiring standards.

CAUTION

Do not connect the transmitter/receiver to a computer data
or telecommunications network.

Step 3

Connect the external power supply to the transmitter, or the
receiver, or to both.

Both transmitter and receiver have remote power capability.
For transmission distances up to 300 feet, the power is
required at either the transmitter or the receiver. Greater
distances require power to be applied locally to both
transmitter and receiver.

Step 4

Using the 15-pin front panel HD connectors, attach a computer
input

to the transmitter and a display output to the receiver. See the

example application diagram below.

LCD Projector

Extron
Skew-Free

™

A/V UTP

Cable
(up to 500')

Laptop

Extron
VTT001 MAAP

Twisted Pair Transmitter

Extron
VTR001 MAAP

Twisted Pair
Receiver

Extron
CPM101

Mounting Frame

Extron
CPM101

Mounting Frame

VTR00

1 M

O I

Quick Start Guide — VTT001/VTR001

QS-1