Extron electronic Twisted Pair Receiver VTR001 - Manual (Page 29)

VTT001 and VTR001 • Installation
For mounting the VTT001 MAAP/VTR001 MAAP to a
rack mount shelf, mount the transmitter/receiver
module(s) to the A/V connector frame, then attach the
frame to the shelf. See the example in figure 2-12.
(4) #4 - 40
Screws
(2) #6 Screws
RSB 129 (60-190-01)
Rack Mount Shelf
VIDEO INPUT VTT001CM Twisted P air Transmitter
PO WER
CPM133 (60-584-15) or
CPM112R (60-584-12)
A/V Connector Frame
Figure 2-12 — CPM130 A/V connector frame mounted
to a rack shelf
2. Attach all power and video cables to the rear of the
transmitter/receiver. Power on the transmitter/receiver
now if the external power supply cannot be accessed once
the transmitter/receiver is mounted.
3. Attach the video input and output devices to the front
faceplates of the transmitter and receiver, respectively.
Power on all devices.
2-17