Extron electronic Twisted Pair Receiver VTR001 - Manual (Page 27)

VTT001 and VTR001 • Installation
4. Circuit overloading — Connect the equipment to the
supply circuit and consider the effect that circuit
overloading might have on overcurrent protection and
supply wiring. Appropriate consideration of equipment
nameplate ratings should be used when addressing this
concern.
5. Reliable earthing (grounding) — Maintain reliable
grounding of rack-mounted equipment. Pay particular
attention to supply connections other than direct
connections to the branch circuit (e.g. use of power strips).
Rack mounting
Various 1U rack space frames accommodate the VTT001 MAAP,
VTT001 AAP, VTR001 MAAP, and VTR001 AAP modules. The
CPM133 is a one-third rack width frame that can be mounted to
the IN9080 rack mount shelf. The CPM130 is a half rack width
frame; and the CPM112R, shown in figure 2-11, is a full rack
width frame that holds six double sized modules.
Depending on the A/V connector frame used, the transmitters/
receivers may be mounted to the rack with or without the rack
mount shelf.
2-15