Extron electronic Twisted Pair Receiver VTR001 - Manual (Page 16)

VTT001 and VTR001 • Installation
Installation, cont’d
2-4
Both transmitter and receiver have remote power
capability. For transmission distances up to 300 feet, the
power is required only at either the transmitter or the
receiver. Greater distances will require power to be
applied to both transmitter and receiver.
2b Power input jack — Connect the included 12 VDC external
power supply to this female jack. The VTT001 and the VTR001
use this power input connector. See the notes and warning for
2a
.
The male power plug that connects to this
input jack is shown on the right.
Front Panel Connector and Indicator
VTT001 AAP
INPUT
VTT001 AAP
VTT001 MAAP VTT001
MAAP
3
1
1
3
1
3
Figure 2-3 — VTT001 MAAP, VTT001, and VTT001 AAP
front panel views
The VTT001 MAAP, VTT001 AAP, and VTT001 models
differ in how they are mounted. The AAP version has a
larger faceplate than the VTT001 MAAP.
1 Transmitter video input connector — A 15-pin HD VGA input
for all models. Plug a RGBHV/RGBS video signal into this
connector.
Tip (+) Sleeve Tip (+)
Sleeve
Power plug