KEPCO KLR Series Developers Guide - Manual (Page 73)

KLR-DEV 060713
5-11
ual, “Viewing/Changing Overvoltage or Overcurrent Protection Values,” and may affect prior
output settings.
FIGURE 5-6. PROTECTION WINDOW
The Store/Recall button displays the Store/Recall window (Figure 5-7) which can be used to
store or recall up to 40 different power supply settings. After selecting a location, the Store but-
ton saves the current power supply settings for Voltage Setpoint, Current Setpoint, and Output
State (On or Off) at the selected location. Whenever the same location is selected, the Recall
button restores the saved settings.
FIGURE 5-7. STORE/RECALL WINDOW
The Trigger button opens the Trigger window (Figure 5-8) which allows setting of trigger voltage
and current values. Clicking the Trigger button within the Trigger window causes the power sup-
ply output to be programmed to the settings stored in the Trigger Voltage and Trigger Current
displays.
FIGURE 5-8. TRIGGER WINDOW