KEPCO KLP Series Developer's Guide, Rev 1 - Manual (Page 125)

KLP 031113
B-19
B.75 SYSTem:COMMunication:LAN:GATE COMMAND
SYST:COMM:LAN:GATE
[-1.2K MODELS ONLY]
Syntax: Short Form: SYST:COMM:LAN:GATE {w,x,y,z}
Long Form: SYSTem:COMMunication:LAN:GATE {w,x,y,z}
where w, x, y, and z are numbers from 0 to 255
Description: Specifies the GATE address when DHCP MODE (see PAR. B.69) is set to OFF. (Note that GATE
address must be comma-separated.)
B.76 SYSTem:COMMunication:LAN:GATE? QUERY
SYST:COMM:LAN:GATE?
[-1.2K MODELS ONLY]
Syntax: Short Form: SYST:COMM:LAN:GATE? Long Form: SYSTem:COMMunication:LAN:GATE?
Return Value: {w,x,y,z}
where w, x, y, and z are numbers from 0 to 255
Description: Indicates the static GATE address (comma separated). For example, GATE address of 0.0.0.0
returns 0,0,0,0.
B.77 SYSTem:COMMunication:LAN:IP COMMAND
SYST:COMM:LAN:IP
[-1.2K MODELS ONLY]
Syntax: Short Form: SYST:COMM:LAN:IP {w,x,y,z}
Long Form: SYSTem:COMMunication:LAN:IP {w,x,y,z}
where w, x, y, and z are numbers from 0 to 255
Description: Specifies the IP address when DHCP (see PAR. B.69) is set to OFF. (Note that IP address must be
comma-separated.)
B.78 SYSTem:COMMunication:LAN:IP? QUERY
SYST:COMM:LAN:IP?
[-1.2K MODELS ONLY]
Syntax: Short Form: SYST:COMM:LAN:IP? Long Form: SYSTem:COMMunication:LAN:IP?
Return Value: {w,x,y,z}
where w, x, y, and z are numbers from 0 to 255
Description: Indicates the static IP address (comma separated).
B.79 SYSTem:COMMunication:LAN:MAC? QUERY
SYST:COMM:LAN:MAC?
[-1.2K MODELS ONLY]
Syntax: Short Form: SYST:COMM:LAN:MAC? Long Form: SYSTem:COMMunication:LAN:MAC?
Return Value: xx,xx,xx,xx where xx = hex character pairs
Description: Return the MAC address of the unit. For example, MAC address of 01-23-45-67-89-AB returns
01,23,45,67,89,AB.
B.80 SYSTem:COMMunication:LAN:MASK COMMAND
SYST:COMM:LAN:MASK
[-1.2K MODELS ONLY]
Syntax: Short Form: SYST:COMM:LAN:MASK {w,x,y,z}
Long Form: SYSTem:COMMunication:LAN:MASK {w,x,y,z}
where w, x, y, and z are numbers from 0 to 255
Description: Specifies the MASK address when DHCP (see PAR. B.69) is set to OFF. (Note that MASK address
must be comma-separated.)
B.81 SYSTem:COMMunication:LAN:MASK? QUERY
SYST:COMM:LAN:MASK?
[-1.2K MODELS ONLY]
Syntax: Short Form: SYST:COMM:LAN:MASK? Long Form: SYSTem:COMMunication:LAN:MASK?
Return Value: {w,x,y,z}
where w, x, y, and z are numbers from 0 to 255
Description: Indicates the static MASK address (comma separated). For example, mask of 255.255.255.0
returns 255,255,255,0.