TA Triumph-Adler P-C3060 MFP User Manual
Page 343
10-24
Troubleshooting > Troubleshooting
S
T
Message
Checkpoints
Corrective Actions
Reference
Page
Scanner memory is full.
Job is canceled.
—
Scanning cannot be performed any
more due to insufficient memory.
The job is canceled. Select [OK].
—
Send Error.
*1
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses. For details
on Auto Error Clear, refer to the following:
—
An error has occurred during
transmission. The job is canceled.
Select [OK].
Refer to
for the error code and corrective
actions.
Shake the toner
container. [C][M][Y][K]
—
Shake the toner container well and
reinstall it.
SSD error. Job is
canceled.
—
An error has occurred on SSD. Job
is canceled. Select [OK].
The possible error codes and their
descriptions are as follows.
01: The amount of data that can be
saved at once has been exceeded.
Turn the power OFF/ON. If the error
still occurs, divide the file into
smaller files. If the error occurs after
the file is divided, the specified file
may be damaged. Delete the file.
04: Insufficient space on SSD to
complete this operation. Move data
or delete unneeded data.
—
Message
Checkpoints
Corrective Actions
Reference
Page
The slit glass requires
cleaning.
—
Clean the slit glass using the
cleaning cloth supplied with the
document processor.
The toner container is
not locked or improperly
installed.
—
The toner container is not installed
correctly. Set it correctly.
This user account is
locked out.
Contact administrator
Job is canceled.
—
Contact administrator.
The job is canceled. Select [OK].
—
Toner is low.
[C][M][Y][K]
(Replace when empty.)
—
It is almost time to replace the toner
container. Obtain a new toner
container.
—