TA Triumph-Adler P-C3060 MFP - Manual (Page 282)

9-3
User Authentication and Accounting (User Login, Job Accounting) > Enabling User Login Administration
Enabling User Login Administration
This enables user login administration. Select one of the following authentication methods:
1 Display the screen.
1 [System Menu/Counter] key > [▲] [▼] key > [User/Job Account] > [OK] key
2 [▲] [▼] key > [User Login Set.] > [OK] key
2 Configure the settings.
1 [▲] [▼] key > [User Login] > [OK] key > [▲] [▼] key >
[Local Authentic.] or [Netwk Authentic.] > [OK] key
When selecting [Netwk Authentic.]
1 [▲] [▼] key > [NTLM], [Kerberos] or [Ext.] > [OK] key
2 Enter the host name (64 characters or less) for the Authentication Server and select the
[OK] key.
3 Select the domain name for the Authentication Server, and select the [OK] key.
If the domain has not been set, select the number where "----------------" is displayed and select
[Menu]. Select [Edit] and select the [OK] key then enter the domain name (in 256 characters or less).
Select the [OK] key and the domain will be registered.
To edit or delete a domain name that has already been registered, select that domain name and
select [Menu].
Item Descriptions
Local Authentication User authentication based on user properties on the local user list stored in the
machine.
Network Authentication User authentication based on Authentication Server. Use a user property stored
in Authentication Server to access the network authentication login page.
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator privileges.
The factory default login user name and login password are set as shown below.
Login User Name: 3000
Login Password: 3000
NOTE
Select [Off] to disable user login administration.
NOTE
Up to 10 domain names can be registered.