Recall, Send to me (e-mail), Recall -23 send to me (e-mail) -23 – TA Triumph-Adler P-C3060 MFP User Manual
Page 174
5-23
Operation on the Machine > Sending
Recall
Recall is a function allowing you to send the last entered destination once again. When you want to send the image to
the same destination, select the [Address Recall/Pause] key, and you can call the destination you sent on the
destination list.
1
Select the [Address Recall/Pause] key.
The destination you sent is displayed on the destination list.
2
Press the [Start] key.
Sending starts.
Send to Me (E-mail)
When user login is enabled, the document is sent to the E-mail address of the logged in user.
1
In the basic screen for sending, select [▲] [▼] key >
[Me(E-mail)] > [OK] key
NOTE
When the last sending included FAX, computers and E-mail destinations, they are also
displayed. If necessary, add or delete the destination.
NOTE
• When [On] is selected in "Check beforeSend", a destination confirmation screen is
displayed when you press the [Start] key.
Confirmation Screen of Destinations (page 5-22)
• Recall information is canceled in the following conditions.
- When you turn the power off
- When you send a next image (new recall information is registered)
- When you log out
NOTE
An E-mail address must be set in user login for the user who logs in.