System/network, System/network -26, Network setting – TA Triumph-Adler P-C3060 MFP User Manual
Page 270: Configures network settings
8-26
Setup and Registration (System Menu) > System Menu
System/Network
Configures machine system settings.
Network Setting
[System Menu/Counter] key > [▲] [▼] key > [System/Network] > [OK] key > [▲] [▼] key > [Network Setting] > [OK] key
Configures network settings.
Host Name
TCP/IP Settings
Item
Description
Host Name
Check the host name of the machine. Host name can be changed from Embedded Web Server RX.
Changing Device Information (page 2-42)
Item
Description
TCP/IP
Set up TCP/IP to connect to the Windows network.
Value
: Off, On
IPv4 Setting
Set up TCP/IP (IPv4) to connect to the network.
DHCP
Select whether or not to use the DHCP (IPv4) server.
Value
: Off, On
Auto-IP
Select whether to use Auto-IP.
Value
: Off, On
IP Address
Set the IP addresses.
Value
: ###.###.###.###
NOTE
If DHCP is set to [On], this item is displayed only and cannot be entered.
Subnet Mask
Set the IP subnet masks.
Value
: ###.###.###.###
NOTE
If DHCP is set to [On], this item is displayed only and cannot be entered.
Default Gateway
Set the IP gateway addresses.
Value
: ###.###.###.###
NOTE
If DHCP is set to [On], this item is displayed only and cannot be entered.
IPv6 Setting
Select whether to use IPv6.
Value
: Off, On
NOTE
This setting is available when [TCP/IP] is [On].
The IPv6 settings are configured from the Embedded Web Server RX.
Embedded Web Server RX User Guide
Bonjour
Select whether or not to use Bonjour.
Value
: Off, On
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.