Wsd scan, Wsd scan -26 – TA Triumph-Adler P-C3060 MFP User Manual
Page 177
5-26
Operation on the Machine > Sending
WSD Scan
WSD Scan saves images of originals scanned on this machine as files on a WSD-compatible computer.
Installing Driver Software (for Windows 7)
1
Display [Network] in the Start menu.
Click [Start] button on the Windows and then select [Network].
2
Install the driver.
Right-click the machine's icon and then click [Install].
During the installation, double-click the icon shown on the task bar to display the "Driver
Software Installation" screen. When "Your devices are ready to use" is displayed on the
[Driver Software Installation] screen, the installation is completed.
Installing Driver Software (for Windows 8 and Microsoft Windows Server 2012)
1
Click [Search] in charms, [Control Panel], and then [View
devices and printers].
2
Install the driver.
Click [Add a device]. Select the machine's icon and then click [Next].
When the machine's icon is displayed in "Printers" on the [Devices and Printers] screen, the
installation is completed.
NOTE
• To use WSD Scan, confirm that the computer used for WSD scanning and the machine is network-connected, and
"WSD-SCAN" is set to [On] in the network settings.
• For information on operating the computer, refer to the computer's help or the operation guide of your software.
NOTE
When [Network] does not appear in the Start menu, perform the following procedure.
1
Right-click [Start] and click [Property] in the menu that appears.
2
Select the [[Start] menu] tab in the "Task bar and [Start] menu properties" screen, and
click [Customize].
3
When the "Customize [Start] menu" screen appears, select the "Network" check box
and click [OK].
NOTE
If the "User Account Control" window appears, click [Continue].
If the "Found New Hardware" window appears, click [Cancel].