Epson PhotoPC 550 User Manual
Page 44
3-12
Getting Pictures Into Your Computer
Follow these steps to fix your camera connection:
1
Make sure the camera is turned on and has not shut off
automatically. If it has, turn it off and then back on
again by closing and opening the lens cover.
2
Check the cable and make sure the connections to the
camera and computer are secure.
3
Make sure your batteries have enough power, or your
AC adapter is connected.
4
Click
Test Connection
. If you see the same screen,
continue with step 5.
5
Select another port if necessary. In most cases, it is best
to leave the
Port
setting at
Auto
.
If you have a serial device connected to one port and an
internal modem on the other, you can try COM3 or
COM4.
6
Select a slower speed. You may need to experiment to
choose the best speed.
7
Click
Test Connection
again. If you still don’t see
your pictures, see Chapter 9 for more troubleshooting
tips.
computer.fm Page 12 Friday, October 10, 1997 2:39 PM