Collate/offset, Original size – TA Triumph-Adler 1855 User Manual
Page 98
5-19
Operation on the Machine > Copying
Collate/Offset
Offsets the output by page or set.
Original Size
Specify the original size to be scanned.
Value
Image
Description
Off
―
Disables the function.
Collate Only
Scans multiple originals and delivers complete sets of copies
as required according to page number.
Offset Each Page
When offsetting is used, printed copies are produced after
rotating each page by 90 degrees.
NOTE
To use offsetting, the same size of paper as the selected paper
tray must be loaded in a different orientation in a different
paper tray.
The paper sizes supported in Offset are A4, B5, Letter and
16K.
Offset Each Set
When offsetting is used, printed copies are produced after
rotating each set by 90 degrees.
NOTE
To use offsetting, the same size of paper as the selected paper
tray must be loaded in a different orientation in a different
paper tray.
The paper sizes supported in Offset are A4, B5, Letter and
16K.
Item
Description
Auto
Have the size of original detected automatically.
A3, A4-R, A4, A5-R, A5, A6-R, B4, B5-R, B5, B6-R, B6, Folio,
216 × 340 mm, Ledger, Letter-R, Letter, Legal, Statement-R,
Statement, 11 × 15", Oficio II, 8K, 16K-R, 16K, Hagaki,
Oufukuhagaki, Custom
*1
*1 For instructions on how to specify the custom original sizes, refer to
Select from standard sizes.
NOTE
Be sure to always specify the original size when using custom size originals.