Administrator user name and password, Administrator setting, Administrator user name and password -20 – TA Triumph-Adler 1855 User Manual
Page 46: Administrator setting -20
2-20
Installing and Setting up the Machine > Administrator User Name and Password
Administrator User Name and Password
If you are setting a function that requires administrator rights, you must enter your login user name and login password.
The factory default login user name and login password are set as shown below.
You can change the default login user name and login password. Refer to
Administrator Setting on page 2-20
.
You will be unable to log in if you forget your login user name or login password.
If job accounting is enabled, you need to enter an account ID. Refer to
.
1
Enter the login user name.
If this screen is displayed during operations, enter the login user name using the numeric keys
and press the [
OK
] key.
2
Enter the login password.
Enter the login password using the numeric keys and press the [
OK
] key.
Administrator Setting
Change the login user name and login password for the administrator.
1
Display the screen.
1
Press the [
Status/System Menu/Counter
] key.
2
Press the [
▲
] or [
▼
] key to select [Admin/Accounting], and press the [
OK
] key.
Login User Name
Login Password
Admin
*1
*1 Upper case and lower case letters are distinguished (case sensitive).
Admin
Character Entry Method (page 10-4)
Character Entry Method (page 10-4)
Login User Name
1
2
Login Password
1
2
Status/Sys. Menu
Admin/Accounting
2
1