Border erase – TA Triumph-Adler 1855 User Manual
Page 102
5-23
Operation on the Machine > Copying
Border Erase
Erases the black border that forms around the image. The following modes are available.
Border Erase Sheet
Erases black borders around the single sheet original.
Border Erase Book
Erases black borders around the edges and in the middle of the original such
as a thick book. You can specify the widths individually to erase the borders
around the edges and in the center of the book.
NOTE
The default setting for border erase width can be changed. For details, refer to
.
Item
Value
Description
Off
―
Disables the function.
Sheet
―
Copies the original with the default setting. For the
default settings, refer to
.
Book
Advanced Erase
―
Changes the settings.
Sheet
Border
Metric: 0 mm to 50 mm
(in 1 mm increments)
Inch:
0.00 to 2.00"
(in 0.01" increments)
Set the border erase width.
*1
Use the numeric keys or press the [
▲
] or [
▼
] key to
enter the border erase width, and press the [
OK
]
key.
*1 The input units can be changed in System Menu. For details, refer to
Back Page
*2
*2 The optional duplex unit is required.
Same as FrontPage, Do Not
Erase
For 2-sided originals, select [Same as FrontPage]
or [Do Not Erase], and press the [
OK
] key.
Book
Border
Metric: 0 mm to 50 mm
(in 1 mm increments)
Inch:
0.00 to 2.00"
(in 0.01" increments)
Set the border erase width.
Use the numeric keys or press the [
▲
] or [
▼
] key to
enter the border erase width, and press the [
OK
]
key.
Gutter
Back Page
Same as FrontPage, Do Not
Erase
For 2-sided originals, select [Same as FrontPage]
or [Do Not Erase], and press the [
OK
] key.
Original
Copy
Original
Copy