TA Triumph-Adler CX 8682 - Manual (Page 60)

JOB HISTORY
60 U1 Plot
Job History
All job planned for plotting or that have already been printed
are automatically included in the job list:
A job order that contains at least one drawing including the
corresponding SSL file that contains the detailed plot
information is called a job.
Job types
Apart from normal jobs, there are also one special type:
Manual (bypass tray)
If you select „bypass tray“ in the print setting „Media Source“ the
plotter processing this job will be stopped and the operator will
be able to put a special medium in the bypass tray. He can put
in, for example, a thick or a colored paper which is normally
not in one of the trays. It is useful to add the priority “wait” to
this job if the operator can´t put in the medium immediately.
Otherwise the whole printing process could be stopped for a
long time. If required the job can be later started by changing to
a higher priority.
An overview of the job characteristics
A job order has a total seven characteristics, which provide
information about the job. In the normal state they are sorted by
job numbers. In detail, the order characteristics provide the
following information:
• Job Number:
This column contains the consecutive job number, which is
automatically assigned by the program for each incoming job.
The program starts with the number 1,000 with the first