TA Triumph-Adler CX 8682 - Manual (Page 17)

INSTALLATIONS AND SETTINGS ON THE SERVER-PC
U1 Plot 17
After you have finished making the adjustments you must reboot
the computer.
Installing user accounts and groups
If you have to manage a big number of users we recommend to
install user accounts and groups. Especially if you use the FTP
protocol the installing of user accounts and groups is necessary.
Proceed as follows:
1. Open the “Control Panel“ via “Start – Settings – Control
Panel“. Open “Users and Passwords“ in the control panel.
Click on “Add”.
2. Enter the relevant information in the “User name“, “Full
name“, and “Description“ fields. Then click on “Next“.
3. You are then asked for the password. Enter a password and
confirm it by entering it again in the “Confirm password“
field below. Click on “Next“.
4. Select the “Standard user“ option in the next window. Click
on “Finish“.
Close any windows still open by clicking on “OK“.
You can find further explanations for that in Windows Help.
Activating Windows components
The adjustments listed in the following are necessary for correct
functioning of the U1 Plot program as well as for the connecting
the clients.
• SNMP: The settings for this protocol must be activated.
Proceed as follows:
1. Open the settings window with “Start – Settings –
Control Panel – Add/Remove Programs - Add/Remove
Windows Components“.
2. Activate the “Management and Monitoring Tools”
(SNMP) option by clicking on the check box.
3. Click on “Next“ and follow the instructions given in the
further windows.
After you have activated all the services required, adjust the
settings so that the “TCP/IP Print Server“ is automatically started
when the computer is started up.