Rugged Cams HD Megapixel - Manual (Page 83)

83
 Save Option: allow user to select Drive(C, D) and folder to save data.
 Choose ‘OK’ to confirm the setting.
8.2.2 Remote Site
 This menu is for Network setup.
 Make CMS IP address and Port coincide with DVR.
 Remote Site Connection Setup
- Site Name: input DVR site name to be displayed on the right-hand side of DVR icon. Please note that this name has
nothing to do with the ID registered in DVR. User may create a name that is fairly easy to distinguish.
- IP Address/Domain Name: input IP address or Domain Name of DVR (check with SETUP>DEVICES>Network in DVR).
- Command Port: input Administrator’s number among port numbers set in DVR (check with SETUP>DEVICES>Network in
DVR).
- Stream Port: INPUT Video/Audio number among port numbers set in DVR (check with SETUP>DEVICES>Network in
DVR).
- Re-connect when abnormal disconnected: When the CMS has abnormally disconnected, it automatically verifies the
network condition, then tries reconnecting to designated site.
 Scan DVR
- This function automatically detects and registers units currently connected to local networks.
- Click “Scan DVR”, then following will pop up.