Rugged Cams HD Megapixel - Manual (Page 44)

44
4.3.1 OSD
 Please click ( ) DISPLAY>OSD and the following screen will appear.
 The OSD menu will allow user to configure full features (i.e., on/off every letter and icon) displayed on the screen.
 Letters and icons are divided under System and Camera categories. If click ( ) ‘All’, all items are on/off at once.
OSD Margin
 The OSD Margin menu will allow user to adjust the position of OSD (letters) on the monitor. Use it when some of letters are
dropped out and invisible on the monitor.
 Adjust Horizontal to change margin between both ends of the monitor on horizontal side and OSD. Margin range is between
0 and 50, with a larger number representing greater margin.
 Adjust Vertical to change margin between both ends of the monitor on vert 130.
 Vertical side and OSD Margin range is between 0 and 50, with a larger number representing greater margin.
 While pressing (+) or (-) button, a target value increases or decreases by 10 units.
De-Interlace
 This function changes playback display into Progressive Scan or Interlace Scan. Check () De-Interlace, then frame will
display as the Progressive Scan and shows the better picture quality.
Transparency
 The Transparency menu will allow user to alpha-blending of OSD menu on the monitor. Transparency is the quality that an
object or substance has when user can see through it.
 Transparency range is between 0 and 100; with a larger number representing can see through it. (default 0)
 While pressing (+) or (-) button, a target value increases or decreases by 10 units.
4.3.2 Main Monitor
 Please click ( ) DISPLAY>Main Monitor and the following screen will appear.