Rugged Cams HD Megapixel - Manual (Page 202)

202
 Tick the box( □) item Alarm In.
 Click the Time/Date that wishes to activate ATM/POS function on schedule.
 It is possible to activate all the time by clicking top-right side of table.
 Click “OK” to save the schedules.
(NOTE)
Please do not select the Alarm In and Motion simultaneously on schedule setup.
Otherwise, POS/ATM text will be displayed improperly.
26.5 Setup
 Please click ( ) “System>Devices>Serial-In”, then user will see the display below.
26.5.1 Title
 Click “Title” item then virtual keyboard will appear.
 Input the title then click ( ) to save.
26.5.2 Port Setting
 Press ( ) the “Port Setting” button in order to set up the port. Default values are Baud rate 2400 bps, Data Bit 5 bit, Stop Bit
1 bit, Parity None.
 When the setup is done, press enter ( ) to save the setting.