Power-on inspection, Self-calibration, To set the system language – RIGOL DSA875 User Manual
Page 26
RIGOL
User’s Guide for DSA800 Series
1-6
Power-on Inspection
After connecting the instrument to power source correctly, press
at the front
panel to start the spectrum analyzer. Following the start-up screen which shows
the start-up initialization process information, the sweep curve is displayed.
Self-calibration
After the instrument starts, execute self-calibration.
Press System Calibrate Cal Now and the instrument will perform
self-calibration using the internal calibration source.
To Set the System Language
DSA800 series spectrum analyzer supports multiple system languages. You can
press System Language to switch the system language.