RIGOL DP832 - Manual (Page 68)

RIGOL Chapter 2 Front Panel Operations
2-18 DP800 User’s Guide
To Edit the Timer Parameters Manually
You need to set P groups (No.0 to No.(P-1)) of timer parameters; wherein, P is the
number of output groups currently set. Only 6 groups of parameters can be
displayed on each page of the timer parameter list and you can press
or to
view and set the parameters of the other groups. This interface provides timer
parameter preview; users can view the values on the current page of the timer
parameter list (the horizontal axis represents time and the vertical axis represents
voltage and current).
1. Press Parameter and use the numeric keyboard, the left/right direction key or
the knob to select the specified number (No.) in the timer parameter list.
2. Use the up/down direction key to select the voltage (V), current (C) and time (s)
of the current group respectively and use the numeric keyboard or the left/right
direction key and knob to input the desired value.
3. Use the same method to set the parameters of the other groups.
To Edit the Timer Parameters using Templet
The instrument provides various built-in output templets. Users can select the
desired templet, edit the timer parameters using the templet and create waveform.
The instrument will output according to the waveform currently created.
Press Templet to open the templet editing menu. You can edit the timer parameters
according to the steps below.
1. Select the editing object
2. Select the templet
3. Edit the timer parameters
4. Construct the output waveform
1. Select the editing object
Press Edit Obj to select "Voltage" or "Current".
 Voltage: when it is selected, the interface displays the voltage preview and
you can set all the groups to output a fixed current. Press Current and use
the numeric keyboard or the left/right direction key and knob to set the
current value.
 Current: when it is selected, the interface displays the current preview and
you can set all the groups to output a fixed voltage. Press Voltage and use
the numeric keyboard or the left/right direction key and knob to set the
voltage value.
2. Select the templet
Press Type to select the desired templet, including Sine, Pulse, Ramp, Stair Up,
Stair Dn, StairUpDn, Exp Rise and Exp Fall.