RIGOL DP832 User Manual

Page 13

RIGOL

DP800 User’s Guide

cycles of channel on/off toggle

 Support digital trigger (option) to realize digital trigger input and trigger output

functions

 Support on-line analyzer (option) to perform on-line analysis of various statistic

parameters

 Support monitor (option) to monitor the output according to the user-defined

monitor condition

 Provide built-in recorder to perform background recording of the output state

after power-on according to certain record period

 Provide dedicated preset key to perform one-key reset and one-key recall of the

commonly used output voltage and current configurations

 Support serial and parallel output functions
 Support on-line self-test and manual calibration functions
 Provide store and recall function
 Support voltage and current linear programmable functions

Complete Interface Configurations and Flexible Control Method:
 Standard configuration interfaces: USB HOST, USB DEVICE, LAN (option),

RS232 (option), Digital I/O (option), rear panel output interface (DP811)

 Support to extend a GPIB interface via the USB-GPIB interface converter

(option)

 Support USB storage device storage
 Support SCPI remote command control
 Conform to LXI Core 2011 Device instrument standard
 Provide standard 9 pin RS232 interface with flow control function
 Provide 4-wire digital I/O interface which supports the trigger input/output

function