RIGOL DP832 - Manual (Page 64)

RIGOL Chapter 2 Front Panel Operations
2-14 DP800 User’s Guide
Sense working mode. The Sense connecting method at the rear panel is as shown in
the figure below.
Operation Procedures:
1. Connect the load to the corresponding position on the connecting terminal
correctly as shown in the figure above. Pay attention to the polarity when
making connections.
2. Insert the connecting terminal into the output interface at the rear panel of the
instrument correctly. Pay attention to the corresponding relations of the
connecting terminal and the output interface.
3. After selecting the desired range, press Sense to turn on the Sense function.
Note: The output terminals at the front panel and the output interface at the rear
panel cannot be used for the Sense mode at the same time. You can only select one
of them for the Sense function at each time (wherein, the output terminals at the
front panel provide higher output accuracy).
Output Interface at
the Rear Panel
Connecting
Terminal